Cash-In-Drawer Limit Programming - Sam4s ER-900 Series Operation & Programming Manual

Cash-In-Drawer Limit Programming.

A Cash-In-Drawer limit can be programmed so that a warning appears on screen
when the limit is exceeded. Pressing the CLEAR key will remove the error. The
operator should carry out a Paid Out operation to reduce the Cash-in-drawer amount.
Programming the Drawer Limit
1. Turn the control lock to the PGM position.
2. To begin the program, enter 1 1 0 0, then press the SBTL key.
1 1
3. Enter a cash-in-drawer limit (up to 8 digits or 0 for no limit); then press
the QTY/TIME key.
Enter the cash
limit, up to 8
digits
4. Press the CASH key to finish
CASH
0 0 SBTL
QTY/TIME
 171