Programming A New Macro - Sam4s SPS-300 Programming & Operation Manual

Programming a New Macro

1. After selecting a new macro to program, the screens displays with the arrow pointing at the
first macro line:
2. Press the first key of the macro sequence, for example, press 1 (numeric one):
3. The keystroke is recorded on the screen and the cursor moves to the next keystroke.
4. Continue to enter keystrokes until the macro is complete. Press ESC (CLEAR) to end the
macro recording and return to the MACRO PROGRAM screen.
If you wish to add a function to a macro that is not located on the keyboard, or if you
wish to include the CLEAR/ESC, Y/N, PAGE UP, or PAGE DOWN function to a macro
string (these keys are used for editing purposes inside this program), press PAGE DOWN to
display a keycode list:
5. With the keycode list displayed, press PAGE DOWN and PAGE UP to find the function
you wish to add to the macro. Type the numeric code number press ENTER (CASH). The
function is added to the macro.
SAM4S SPS-300 Series Electronic Cash Register AU
1.
2.
3.
4.
5.
6.
7.
8.
1. ONE
2.
3.
4.
5.
6.
7.
8.
FUNCTION
--------------------------------
NLU#1 – NLU#300(1-300)
ONE
TWO
THREE
FOUR
FIVE
KEYCODE
301
302
303
304
305
Program Mode Programming • 261