Sam4s SPS-300 Programming & Operation Manual page 159

PC Update - Program Area
1. Connect the Serial Cable From ECR to PC.
2. At the register, turn the control lock to the S position.
3. Turn the power switch to the OFF position.
4. Press and hold the CASH and CLERK keys. (Use the keys in their default locations, the
upper-right and lower-right keys on the keyboard.)
5. While continuing to hold the CASH and CLERK keys, turn the power switch to the ON
position. (The display will illuminate and the error tone will sound beep-beep-beep in
quick succession.) Release the keys.
6. At the PC, execute the program
"NEWNET_DOWN.exe". The Download dialog
box displays.
7. Select the appropriate com port connection at your
PC at the PORT# option buttons.
8. Click SEL. find the folder where the update files
are located and select S3xxXXXX.bin.
9. Select Program code in the Select One option
buttons.
10. Press OK Button. The download takes about 3½
minutes; the scroll bar will track the progress of the
download. At the ECR, the display will flash
slowly while the update is taking place.
11. When complete, the message Completed displays on the PC. Click OK and the
Download program will close. At the ECR, a rapid beep-beep-beep will be heard, and the
display will flash rapidly, which indicates the update is complete.
12. Turn the power switch to OFF on the register, the Program Area update is complete.
13. Disconnect the PC cable.
14. Perform a memory all clear on the ECR. The ECR is now ready to program or to load a
previously saved end-user program.
SAM4S SPS-300 Series Electronic Cash Register AU
Service Mode Programming • 147