Table of Contents
Advertisement
Program Backup and Load
You can use an SD flash memory card to backup and load (restore) the full program.
NOTE: The program data is saved in a separate folder on the SD card named with
the store. Note that the default store name is "STORE001". See page 150 for more
information about the store name.
Backing Up the Program to an SD Card
SAM4S NR-500 Series Manual
1. Insert the SD card in the register's SD slot.
2. Move to the SERVICE MODE.
3. From the Service Mode menu, select "7.PROGRAM BACKUP".
4. From the PROGRAM BACKUP menu select "1.SD".
5. From the SD menu select "1.PGM BACKUP".
The NR-500 Series will write the program files to the folder:
•
NR-500/STORENAME/PGMBACK
In the example below, the store name is "SAM4S".
•
6. After a short pause, the register will display confirmation of the successful
backup with the message "SUCCESS!" Below is an Explorer view of the
backed up files.
Service Mode Programming • 99
Advertisement
Table of Contents
