Table of Contents
Advertisement
Control panel
(The LCD display will disappear when the power plug is unplugged.)
(葡萄乾 (Raisin))
Put in raisins and other
ingredients (P. EN18
(食譜 (Menu))
Select menu
Current time (clock displays)
adjustment
Pull out the insulating film in advance (P. EN6)
The time is displayed in the 24 hour system.
Plug in
＊You cannot adjust time if it is not plugged in.
Press 時 (H) or 分 (M)
Release fingers when a beep sound is heard.
Adjust time
＊ Adjust time when flashing
(E.g. adjust the time to 3:30 p.m.)
(
)
Hold for fast
forward
Completed when flashing stops.
Pull out the plug
＊ Time adjustment cannot be completed if you
pull out the power plug before the flicker stops.
EN20)
Menu
(烤色 (Crust colour))
Change crust colour (P. EN21)
(time display flashes)
(時 / 分 (Hour / minute))
Set timer (P. EN22)
Adjust current time (See below)
Set cooking time (P. EN76, EN78)
(預約 (Timer))
Setting timer for completion timer (P. EN22)
Replace lithium battery
＊ Use the lithium battery to enable the bread maker
to memorize current time and previous settings.
Take out the battery base
Secure the battery with left hand by holding
the base in front. Take out the battery.
Lithium battery
Turn the battery base upside down and
install the battery. Install the battery
base back in the main unit.
Lithium battery
( Anode facing
downwards)
Turn over the
battery base
＊Please confirm that the battery does not drop down.
＊Baking can be started even if the lithium battery is not installed.
(開始 (Start))
Start baking or
timing
(取消 (Cancel))
Reset
Stop after baking
is started
(Hold)
Battery base
Install the
lithium battery
with anode
facing upwards
EN7
Advertisement
Chapters
Table of Contents
