Watch Dog Timer Menu - Panasonic PN28160K Operation Manual

4.9.7. Watch Dog Timer Menu

On the Switch Tools Configuration Menu, pressing "W" opens the Watch
Dog Timer Menu, as shown in Fig. 4-9-10. On this screen, you can
enable/disable the Watch Dog Timer function.
PN28160K Local Management System
Switch Tools Configuration -> Watch Dog Timer Menu
Watch Dog Timer:
-------------------------------- <COMMAND> -----------------------------------
Set [W]atch Dog Timer
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
Watch Dog Timer
Available commands are listed below.
W Enable/disable the Watch Dog Timer function.
Press "W." The command prompt changes to "Enable or Disable Watch Dog
Timer(E/D)>." Press "E" to enable the function. Press "D" to disable it.
Q Return to the previous menu.
Disabled
Fig. 4-9-10 Watch Dog Timer Menu
Shows the status of the Watch Dog Timer function.
The factory default setting is "Disabled."
Enabled The function is enabled.
Disabled The function is disabled.
255