Table of Contents
Advertisement
Convenient shooting functions
Setting the marker display
Select the type and display of the center marker, safety zone marker, safety zone area, and frame marker.
Set marker display in each item in the [VIDEO OUT/LCD/VF] menu → [SDI OUT1 MARKER]/[SDI OUT2 MARKER]/[LCD/VF MARKER].
Marker confirmation screen (marker select function)
Displays the screen for confirming the marker status of the camera is displayed on the viewfinder screen.
Pushing the <MARKER SEL>/<MODE CHECK> switch on the camera towards the <MKR> side switches the marker on the viewfinder in the order of
[A] marker, [B] marker, and no display.
Aspect ratios 14:9 and 4:3 can be confirmed by using the <MARKER SEL>/<MODE CHECK> switch when set to the following.
f Set [MKR:A] as the [VIDEO OUT/LCD/VF] menu → [LCD/VF MARKER] → [FRAME MARKER] → [14:9].
f Set [MKR:B] as the [VIDEO OUT/LCD/VF] menu → [LCD/VF MARKER] → [FRAME MARKER] → [4:3].
Displaying zebra pattern
The camera can display two types of zebra patterns.
When the <ZEBRA> switch of the viewfinder is set to <ON>, the zebra pattern currently set in the menu is displayed on the viewfinder screen.
Zebra patterns can also be displayed in the video output from <SDI OUT1>/<SDI OUT2>/<HDMI> terminals according to settings.
The level for displaying zebra patterns can be set in the [VIDEO OUT/LCD/VF] menu → [EI ASSIST].
Item
[ZEBRA1 DETECT]
[ZEBRA2 DETECT]
[ZEBRA2]
[SPOT]: The image level from the setting value of [ZEBRA1 DETECT] to the setting value of [ZEBRA2 DETECT] is displayed in the zebra pattern.
When displaying the zebra pattern in the video output from <SDI OUT1> and <SDI OUT2> terminals, perform setting in the [VIDEO OUT/LCD/VF] menu
→ [SDI OUT1]/[SDI OUT2] → [SDI OUT ZEBRA].
Chapter 5 Shooting — Convenient shooting functions
Type of marker
Center marker
Sets the level of zebra pattern 1 tilting to the right.
f [0%]...[109%]
(Factory setting: [80%])
Sets the level of zebra pattern 2 tilting to the left.
f [0%]...[109%]
(Factory setting: [100%])
Selects the type of [ZEBRA2].
f [ON], [SPOT], [OFF]
(Factory setting: [OFF])
Image level
[ON]
[109%]
[ZEBRA2 DETECT]
[ZEBRA1 DETECT]
[0%]
Safety zone
Frame marker
Description of settings
[ZEBRA2]
[OFF]
[SPOT]
– 154 –
Advertisement
Table of Contents
