Audio (Output) Function Section - Panasonic AJ-CX4000G Operating Instructions Manual

Audio (output) function section

4
5
1 <MONITOR> dial
Adjusts the volume of the monitor audio during playback, recording, and recording standby.
2 <ALARM> dial
Adjusts the volume of the alarm from the built-in speaker and earphones.
When set to the minimum position, the alarm cannot be heard.
3 Built-in speaker
EE audio is output during recording, and playback audio is output during playback.
An alarm sound is output in sync with flashing/lighting of the <WARNING> lamp or warning indicator.
Audio from the built-in speaker is automatically muted when earphones are connected to the <PHONES> terminal.
4 <MONITOR SELECT> switch
Selects audio output from the built-in speaker, earphones, and <AUDIO OUT> terminal interlocked with the audio channel selector switch.
<CH1/3>: Outputs audio signal of the audio channel 1 or the audio channel 3.
<ST>: Outputs the stereo audio signal of the audio channel 1 and the audio channel 2, or the audio channel 3 and the audio channel 4. Set to the
MIX signal in the [AUDIO] menu → [OUTPUT SETTINGS] → [MONITOR SELECT] → [MIX].
<CH2/4>: Outputs audio signal of the audio channel 2 or the audio channel 4.
<MONITOR SELECT> switch
<CH1/3>
<ST>
<CH2/4>
* Switches between [STEREO] and [MIX] in the [AUDIO] menu → [OUTPUT SETTINGS] → [MONITOR SELECT].
5 Audio channel selector switch
Switches the audio channel output to the built-in speaker, earphones, and <AUDIO OUT> terminal.
<CH1/2>: Outputs audio signal of the audio channel 1 and the audio channel 2.
<CH3/4>: Outputs audio signal of the audio channel 3 and the audio channel 4.
6 <PHONES> terminal
This is a stereo mini jack terminal for the audio monitor earphones.
Same audio is output for both the front and the rear sides.
7 <AUDIO OUT> terminal
Outputs the audio signal recorded in the audio channel 1 to audio channel 4.
f The audio signal to be output is switched with the <MONITOR SELECT> switch.
Chapter 2 Description of Parts — Audio (output) function section
1 2 3
6
<CH1/2>
Audio channel 1
Stereo output from audio channels 1 and 2*
Audio channel 2
6
7
Audio channel selector switch
– 24 –
<CH3/4>
Audio channel 3
Stereo output from audio channels 3 and 4*
Audio channel 4