Connecting To A Pc (File Transfer/Nonlinear Editing); Operating Environment (Mass Storage) - Panasonic HC-PV100 Operating Instructions Manual

Linking to external devices
Connecting to a PC
(File transfer/nonlinear editing)
When this device and a computer for editing are connected using a USB 2.0 Cable (commercially-
available), image data in the SD card can be transferred.
≥ This unit supports USB 2.0.
≥ Concerning non-linear editing, refer to the instruction manual of your editing software.
≥ Final Cut Pro can be used if you have a Mac computer. (For details on Final Cut Pro, contact
Apple.)
≥ It is impossible to write data to the SD card on this unit from a PC.

Operating environment (mass storage)

≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs
cannot be used.
≥ The USB equipment operates with the driver installed as standard in the OS.
∫ If using Windows
≥ Operation is not guaranteed in the following cases.
j Operation on an upgraded OS.
j Operation on an OS other than the one pre-installed.
OS
CPU
RAM
Interface
Other requirements Mouse or equivalent pointing device
∫ If using Mac
PC
OS
CPU
RAM
Interface
Other requirements
Windows 10 (32 bit/64 bit)
Windows 8.1 (32 bit/64 bit)
Windows 7 (32 bit/64 bit) SP1
1 GHz or higher
32-bit (k86) or 64-bit (k64) processor
2 GB or more (64 bit)/1 GB or more (32 bit)
USB port
Mac
OS X v10.11
Intel Core 2 Duo or better
2 GB or more
USB port
Mouse or equivalent pointing device
- 99 -