Table of Contents
Advertisement
Items/
Data Saved
For setting the super black level.
– C U F R
For selecting ON/OFF of the AUTO
KNEE function and DRS function.
When it is set to OFF, the AUTO KNEE
may not function even if the AUTO KNEE
switch is turned ON.
When the DRS function is enabled and
the AUTO KNEE switch is positioned to
ON, the DRS function turns on.
S C U F R
For the setting to adjust the black shading
automatically when the AUTO W/B BAL
switch is held to the ABB side for 8
seconds or more.
– C U F R
For selecting the color bar to be used.
SMPTE:
SPLIT:
ARIB:
– C U F R
For selecting the method used to release
the super gain mode.
:
:
– C U F –
For selecting the method used to release
the digital super gain mode (cumulative
gain).
:
– C U F –
For specifying whether to enable or
disable 2
camera-recorder is assigned the digital
zoom function.
– C U F R
For specifying whether to enable or
disable 3
camera-recorder is assigned the digital
zoom function.
– C U F R
For specifying whether to enable or
disable 4
camera-recorder is assigned the digital
zoom function.
– C U F R
For specifying what the camera-recorder
does when the REC check button on the
remote control unit or the extension
control unit is pressed.
– C U F R
Menu: Menu Description Tables
Remarks
Color bar complied with the
SMPTE standards
Full color bar
SPLIT color bar for SNG
(Satellite News Gathering)
Color bar complied with the
ARIB standards
The mode is released by
making a change in the L/M/
H switch position and the
S.GAIN switch (USER
switch).
Disabled only with the
S.GAIN switch (USER
button).
The mode is released by
making a change in the L/M/H
switch position and the
DS.GAIN switch (USER
switch).
: The mode is released using
only the DS.GAIN switch
(USER switch).
when a user button on the
when a user button on the
when a user button on the
The camera-recorder
performs rec review.
The camera-recorder
performs playback.
WHITE BALANCE MODE
Items/
Data Saved
For selecting independently whether
memory data for white balance (Ach,
Bch) is retained or not for the respective
CC filters.
ON: Regardless of the CC filter, data for
the memories (2 memories) for Ach
and Bch is retained.
OFF: The memory data (8 memories) for
Ach and Bch is retained for the
– C U F R
respective CC filters.
For setting the length of time for transiting
to the switched position of white balance,
when the position of the WHITE BAL
switch is changed.
– C U F R
For switching the detection area for
executing the automatic adjustment of
white balance.
25%: An area near the screen center
equivalent to 25% of the screen is
detected.
50%: An area near the screen center
equivalent to 50% of the screen is
detected.
90%: An area equivalent to 90% of the
– C U F R
screen is detected.
For selecting the function to be assigned
to the B position of the WHITE BAL
switch.
MEM: The value set when the white
ATW: The auto-tracking white balance
– C U F R
Select the control speed for the auto-
tracking white balance.
– C U F R
For selecting whether the PRESET color
temperature is variable or switchable
between 3200K and 5600K. Immediately
after revising the value, the color
temperature for PRESET is set to 3200K
(For Filter A).
Selectable within the range from
2300K
Switchable between 3200K and
5600K.
– – – F –
Remarks
To transit instantly
About 1 second
About 2 seconds
About 3 seconds
About 10 seconds
About 20 seconds
balance is automatically adjusted
is saved, which is used each time
the WHITE BAL switch is set to
B.
function is assigned.
to 15000K .
Advertisement
Table of Contents
