Sw Mode; White Balance Mode - Panasonic AJ-SPX800P Operating Instructions Manual

8-5-5 SW MODE

Items/ Adjustable
Data Saved Range
RET SW REC Select the RET switch function.
REC CHECK:
CHECK
CAM RET
CAM RET:
– C U F E
S.BLK LVL OFF Set the super black level.
–10
–20
–30
– C U F E
AUTO KNEE ON Select whether or not to use the AUTO
KNEE switch.
SW OFF
S C U F E
SHD,ABB SW ON Select whether or not to enable the
automatic black shading adjustment if the
CTL OFF
ABB switch has been pressed for 5 seconds
or more.
– C U F E
COLOR BARS SMPTE Select the color bars to use.
SMPTE:
FULL
FULL BARS: Use full color bars.
BARS
SPLIT:
SPLIT
ARIB:
ARIB
– C U F E
S.GAIN OFF L/M/H Select when the SUPER GAIN mode is
disabled.
S.GAIN
L/M/H: Disabled when the gain selector
S.GAIN: Disabled only with the S.GAIN switch
– C U F E
DS.GAIN OFF L/M/H Select when the DIGITAL SUPER GAIN
mode (stored gain) is disabled.
DS.GAIN
L/M/H:
DS.GAIN: Disabled only with the DS.GAIN
– C U F E
ECU DATA ON ON: Store the values set and adjusted with
SAVE OFF
OFF: Does not store camera-related set
– C U F –
ECU REC CHK R.REVIEW Select the camera-recorder operation to be
performed when the ECU REC CHECK
SW PLAY
button is pressed.
R.REVIEW: Perform REC REVIEW.
PLAY:
– C U F E
114
Remarks
Perform REC REVIEW.
Perform return signal output.
Use the SMPTE color bars.
Use SPLIT color bars.
Use ARIB multi-format color
bars.
switch is operated.
(USER button).
Disabled when the gain selector
switch is operated.
switch (USER button).
the ECU when the ECU is
disconnected from the camera-
recorder.
values.
Play back the most-recently
recorded clip from the beginning.

8-5-6 WHITE BALANCE MODE

Items/ Adjustable
Data Saved Range
FILTER INH ON Select whether or not to retain white balance
memory (A/B) data for individual filters.
OFF
ON: Retain data in the A/B memory (2
OFF: Retain data for individual filters.
– C U F E
SHOCKLESS OFF Set SHOCKLESS AWB to ON (FAST/
NORMAL/SLOW1-3) or OFF.
AWB FAST
SHOCKLESS AWB eliminates the shock
NORMAL
caused by switching the WHITE BAL
SLOW1
switch's PRST/A/B setting. The switching
SLOW2
time can also be selected.
SLOW3
– C U F E
AWB AREA 25% Switch the AWB detection area.
50% 25%: Detect 25% of area around the screen
90%
50%: Detect 50% of area around the screen
90%: Detect 90% of area in the full screen.
– C U F E
AWB & ABB ON Select whether or not to reset the GAIN and
PED values in the ROP menu when AWB
OFFSET OFF
and ABB are executed.
ON: Do not reset.
OFF: Reset values.
– C U F E
COLOR TEMP 3200K Set the AWB PRE color temperature.
PRE :
5600K
– C U F E
AWB A MEM Select the function to be allocated to WHITE
BAL switch A.
VAR
MEM: Function to store values set by
VAR: Function to apply color temperature
– C U F E
COLOR TEMP 3200K Set the color temperature when VAR is
selected under AWB A.
A :
5600K
– C U F E
AWB B MEM Select the function to be allocated to WHITE
BAL switch B.
ATW
MEM: Function to store values set by
VAR
ATW: Function to execute auto-tracking
VAR: Function to apply color temperature
– C U F E
COLOR TEMP 3200K Set the color temperature when VAR is
selected under AWB B.
B :
5600K
– C U F E
ATW SPEED NORMAL Select the control speed for the auto-
tracking white balance.
SLOW
FAST
– C U F E
The ____ in the Adjustable Range column indicates the preset
mode.
Remarks
memory areas) regardless of the
filters.
center.
center.
executing the auto white balance.
set by COLOR TEMP A.
executing auto white balance.
white balance.
set by COLOR TEMP B.