Selecting Thumbnails; Setting Thumbnail Screen Display - Panasonic AJ-PX800G Operating Instructions Manual

19 Thumbnail scroll bar
Indicates which part of the whole thumbnail is currently being viewed.

Selecting thumbnails

Multiple thumbnails can be randomly selected on the thumbnail screen.
Selecting clips
You can select multiple clips randomly.
1
Use the cursor buttons to move the cursor over the desired clip.
2
Press the <SET> button.
A light blue frame and are displayed on the clip where the cursor is put. This indicates that it is selected.
3
To select additional clips, repeat steps 1 to 2.
It is possible to display only the selected clips on the thumbnail screen for playback.
@
NOTE
t While holding down the <SHIFT> button, press the cursor buttons (`/{) to move the cursor to the irst or last clip.
t After selecting a clip, move the cursor to another clip and while holding down the <SHIFT> button, press the <SET> button to select all clips from the
previously selected clip to the cursor position.
t As clips are selected, the number of selected clips displayed on the lower right corner of the screen changes according to the selection.
Deselecting clips
1
Move the cursor to the selected clip and press the <SET> button.
This deselects the clip.
@
NOTE
t While holding down the <SHIFT> button, press the <EXIT> button to deselect all the clips at once.

Setting thumbnail screen display

You can customize the thumbnail screen according to usage.
Select [THUMBNAIL SETUP] in the main menu → [CLIP].
1
The thumbnail setting items ([INDICATOR], [DATA DISPLAY], [THUMBNAIL SIZE], [PB POSITION], [PROPERTY DISP.]) are displayed. For details,
refer to "Setting items that display properties" (page 103).
Setting thumbnails to be displayed
Select [REPOSITION] in the main menu → [CLIP].
1
2
Use the cursor buttons to move the cursor to the type of the clip you want to display.
3
Press the <SET> button.
Setting the thumbnail size
You can customize the thumbnail size.
Select [THUMBNAIL SIZE] in the main menu → [CLIP] → [THUMBNAIL SETUP].
1
2
Use the cursor buttons to move the cursor to the size of the thumbnail you want to display.
3
Press the <SET> button.
Chapter 5 Playback — Thumbnail operations
Setting example for thumbnail screen ([INDICATOR])
– 102 –