Main Setup Screen - Congatec conga-IA3 User Manual

The setup program uses a key-based navigation system. Most of the keys can be used at any time while in setup. The table below explains the
supported keys:
Key
← → Left/Right
↑ ↓ Up/Down
+ - Plus/Minus
Tab
F1
F2
F9
F10
ESC
ENTER
8.3

Main Setup Screen

When you first enter the BIOS setup, you will see the main setup screen. The main setup screen reports BIOS, processor, memory and board
information and is for configuring the system date and time. You can always return to the main setup screen by selecting the 'Main' tab.
Feature
Main BIOS Version
OEM BIOS Version
Build Date
Product Revision
Serial Number
BC Firmware Revision
MAC Address
MAC Address #2
Boot Counter
Running Time
Microcode Patch
Baytrail SoC
Total Memory
System Date
System Time
Copyright © 2015 congatec AG
Description
Select a setup menu (e.g. Main, Boot, Exit).
Select a setup item or sub menu.
Change the field value of a particular setup item.
Select setup fields (e.g. in date and time).
Display General Help screen.
Load previous settings.
Load optimal default settings.
Save changes and exit setup.
Discard changes and exit setup.
Display options of a particular setup item or enter submenu.
Options Description
No option Displays the main BIOS version.
No option Displays the additional OEM BIOS version.
No option Displays the date the BIOS was built.
No option Displays the hardware revision of the board.
No option Displays the serial number of the board.
No option Displays the firmware revision of the congatec board controller.
No option Displays the MAC address of the onboard Ethernet controller.
No option Displays the MAC address of the second onboard Ethernet controller.
No option Displays the number of boot-ups. (max. 16777215).
No option Displays how long the system has been running.
No option Displays the microcode version
No option D.0 Stepping for Atom CPUs and C.0 for Celeron CPUs.
No option Total amount of low voltage DDR3 present on the system
Day of week, month/ Specifies the current system date
Note: The date is in month/day/year format.
day/year
Hour:Minute:Second Specifies the current system time.
Note: The time is in 24 hour format.
IA30m10 53/82