Sdio Submenu; Usb Submenu; Platform Trust Technology - Congatec conga-IA3 User Manual

8.4.21

SDIO Submenu

Feature
SDIO Access Mode
8.4.22

USB Submenu

Feature
USB Module Version
USB Devices
xHCI Hand-off
EHCI Hand-off
USB Mass Storage
Driver Support
Device Reset Timeout
USB Transfer Timeout
Device Power -Up Delay
Selection
Device Power -Up Delay
Value
8.4.23

Platform Trust Technology

Feature
fTPM
Copyright © 2015 congatec AG
Options Description
Auto
Controls the SDIO Access mode to the device.
DMA
PIO
Options Description
No option Displays the version of the USB module.
No option Displays the detected USB devices.
Enabled This is a workaround for OSes without xHCI hand-off support. The xHCI ownership change should be claimed by xHCI OS driver.
Disabled
Disabled This is a workaround for OSes without EHCI hand-off support. The EHCI ownership change should be claimed by EHCI OS
Enabled driver.
Disabled Enable Mass Storage Driver Support.
Enabled
10 sec USB legacy mass storage device start unit command timeout.
20 sec
30 sec
40 sec
1 sec The timeout value for control, bulk, and interrupt transfers.
5 sec
10 sec
20 sec
Auto Define maximum time a USB device might need before it properly reports itself to the host controller. Auto selects a default
Manual value which is 100ms for a root port or derived from the hub descriptor for a hub port.
0-40 Actual power-up delay value in seconds.
Default : 5
Options Description
Disabled Enable Trusted Platform Module support.
Enabled
IA30m10 71/82