View Stored Presets With The Touch Control; Store A Preset With The Touch Control; Move The Camera To A Stored Preset With The Touch Control - Polycom RealPresence Group Series User Manual

If far-end camera control is allowed, you can create 10 presets for the far-end camera. These presets are
saved only for the duration of the call. You might also be able to use presets that were created at the far end
to control the far-end camera.
Keep the following camera control information in mind when using Self Layout:
● When in a call, selecting near camera control pans and zooms the local camera without changing the
layout.
● When out of a call, selecting camera control changes the Self View to full screen.
● Incoming calls override the full-screen Self View layout.

View Stored Presets with the Touch Control

You need to be familiar with the stored camera presets to get the most out of your system.
To view presets:
1 From the Home screen or Call screen, touch Cameras.
2 If you are in a call, touch Near or Far to select either near-end or far-end control.
3 Touch View Presets.
Icons for presets 0-9 are shown on the screen. Solid preset icons indicate stored camera positions.
Transparent icons indicate unassigned presets.
4 Touch a number to go to a saved preset.

Store a Preset with the Touch Control

You cannot delete a preset. Instead, overwrite an existing preset with a new camera position.
To store a preset:
1 From the Home screen or Call screen, touch Cameras.
2 If you are in a call, touch Near or Far to choose a near-end or far-end camera.
3 Touch Select Camera to choose a camera or other video source.
4 Touch Control Camera to move the camera to the desired position.
5 Touch View Presets, then touch and hold a number to store the preset position. Any existing preset
stored at the number you select is replaced.

Move the Camera to a Stored Preset with the Touch Control

After you have your presets stored, move the camera to one of the stored presets.
To move the camera to a preset using the Touch Control:
1 From the Home screen or Call screen, touch Cameras.
2 If you are in a call, touch Near or Far to select either near-end or far-end control.
3 Touch View Presets. Icons for presets 0-9 are shown on the screen. Solid preset icons indicate
stored camera positions. Transparent icons indicate unassigned presets.
4 Touch a number to go to a saved preset.
Polycom, Inc. 24