Sip Users Feature Codes Settings - Polycom KIRK Wireless Server 8000 Interface Configuration Manual

Polycom KIRK Wireless Server 8000 & KIRK Wireless Server 2500 Configuration Guide
Note

SIP Users Feature Codes settings

23
choose "All local calls" level then "Between DECT to DECT and all types of
local users" level then "Internal Setup from PP will result in local switched
call" level and Level 3 are also chosen automatically).
When calls are routed internally it is not possible to use the R-key (hold and
transfer calls).
Click Save to write the configuration to the system.
4
If a handset has a call forward enabled the standby text will be pre-ended with
(CFU) to give the user an indication that the handset is forwarded.
To enable/disable CFU
On the System menu, click Configuration. The System Configuration
1
page is displayed.
Figure 4-11 SIP Users Feature Codes settings
Enable or disable the SIP Users Feature Codes.
2
Specify the codes for enabling and disabling CFU.
3
• Code for enabling CFU- default code is
forward the calls to.
• Code for disabling CFU - default code is
Click Save to write the configuration to the system.
4
System Configuration
*21*$# where $ denotes the number to
#21#.
Polycom, Inc.