Setup; Printing - Fuji Xerox ApeosPort-IV 5070 User Manual

Setup

To print from your computer, your computer must have a print driver installed.
For information on how to install the print driver, refer to the manual included in the Driver CD Kit.
Note • When printing using authentication information, you must configure the printer settings on

Printing

The following describes how to print documents.
The procedure for printing depends on the application software you use. For more
information, refer to the documentation provided with the application.
For more information on print features, click [Help] on the print driver screen to view the print driver's help.
1
Select [Print] from the [File] menu on the application.
2
Confirm [Printer Name] and click [Properties] if necessary.
3
Set the properties if necessary.
Note • You can change the print feature in
4
Click [OK].
5
Click [OK] in the [Print] dialog box.
Note • If the document monitor is installed and set to monitor the machine, the notification screen is
• The environment-friendliness level is indicated on the notification screen with leaves. This
your computer. Make the necessary settings on the [Configuration] tab of the printer's
properties. For more information, refer to the print driver's help.
[Job Type].
displayed when printing has been completed. The document monitor is available in the CD-
ROM of the Driver CD Kit. For information how to install the document monitor, refer to the
manual included in the Driver CD Kit.
information is provided only when [Normal Print] or [Sample Print] is selected in [Job Type].
Print
12
391