Fuji Xerox ApeosPort-IV 5070 User Manual page 121

Output Format
Stored Comments
Allows you to select comment text from eight preset options, or text set in System
Administration mode.
For information on how to register text, refer to "5 Tools" > "Common Service Settings" > "Watermark"
> "Custom Watermark 1 to 3" in the Administrator Guide.
Apply To
Displays the [Apply Comment To] screen.
You can select whether to add a comment onto the first copy page only, or onto each
copy page.
Position
Displays the [Comment - Position] screen.
You can select a comment position from nine options.
For side 2 of copy sheets, you can select [Same as Side 1] or [Mirror Side 1].
Font Size
Displays the [Comment - Font Size] screen.
3
You can select a comment size from three options, or can directly specify the size in
the range from 6 to 64 points in 1 point increments.
[Date] Screen
This screen allows you to add the date onto copies. The date you started copying the
document is printed.
You can change the date format. For more information, refer to "5 Tools" > "Common Service Settings"
> "Watermark" > "Date Format" in the Administrator Guide.
1
Select any option.
Off
No date is added.
On
The date is added.
Apply To
Displays the [Apply Date To] screen.
You can select whether to add a date onto the first copy page only, or onto each copy
page.
Position
Displays the [Date - Position] screen.
You can select a date position from six options.
For side 2 of copy sheets, you can select [Same as Side 1] or [Mirror Side 1].
121