Fuji Xerox ApeosPort-IV 5070 User Manual page 399

2
From the displayed list, click the scanner
name of the machine, and click [Next].
Note • If no scanners are shown in the list, click [Search Again]. The application searches for
scanners.
• To change the display of scanner names, use the dialog box that appears by clicking
[Search/Display Settings]. For more information, refer to "Changing the display of scanner
names" (P.400).
• Only when the machine is connected to the network, the scanner name is automatically
listed. To view the machine connected to another network, click [Search/Display Settings]
and register the IP address and scanner name. For information on how to change the
settings, refer to "Changing the display of scanner names" (P.400).
3
In the [Folder Number] field, enter the
number of the folder (001 - 200) that
contains the file to be imported. In the
[Passcode] field, enter a passcode (up to 20
digits).
Note • You can also select a folder number from
[Registered Folders].
• Clicking [Select Scanner] returns to step
2, where you can reselect a scanner.
4
Click [Confirm].
5
Select a file to be imported from the
list, and click [Import].
Note • You can select multiple files.
• When [File Saving Options] is set to [Set Destination for Each File] under the import settings,
a dialog box for specifying a save destination is displayed. When the dialog box appears,
specify a save destination, and click [OK].
For information on the import settings, refer to "Import settings for scanned files" (P.400).
6
The file is imported to the specified directory.
Note • When [File Saving Options] is set to [Save in Fixed Destination] under the import settings,
the file is saved in the specified directory.
For information on the import settings, refer to "Import settings for scanned files" (P.400).
Importing Scanned Data
399
12