Switching The Power Off - Fuji Xerox ApeosPort-IV 5070 User Manual

Switching the Power Off

The following describes how to switch the power off.
1
Before switching the power off, make sure that the machine has completed all copy or
print jobs. Then, make sure that the <Data> indicator is not blinking.
Important • Do not switch the power off in the following situations. If the power is switched off, the data
• When switching the power off, wait 5 seconds after outputs have been delivered.
2
Press the power switch to the [ ] position.
When the Finisher-B1 (optional) is installed
Important • Power off processing is performed internally on the machine for a while after the power is
Note • When powering the machine on after it has been switched off, wait 15 seconds after the
being processed may be erased.
• While data is being received
• While a job is being printed
• While a job is being copied
• While a job is being scanned
switched off. Therefore, do not switch the main power off immediately after switching the
power off.
touch screen has gone dark.
Power Source
2
53