Ip Fax (Sip) Features - Fuji Xerox ApeosPort-IV 5070 User Manual

IP Fax (SIP) Features

The following describes the IP Fax (SIP) features.
Operations similar to operating regular fax
By selecting [IP Fax (SIP)] and entering an address in the appropriate form, you can
send and receive fax documents in a similar manner as operating regular fax.
Also, you can use most features available for regular fax such as the redial feature,
remote folder, and other features.
For other available features, refer to "Difference from other fax features".
For operations of fax documents received by using the Remote Folder, please refer to "Fax/Internet Fax"
(P.186).
Reduction of telecommunication fee
Within an intranet, communication between IP Fax (SIP) devices requires no
telecommunication fee. For this reason, the IP Fax (SIP) feature is suitable for sending
and receiving fax documents between a head office and branches in an intranet.
By using a VoIP gateway, you can reduce the telecommunication cost for sending fax
documents to the outside of the intranet.
Communication with regular fax machines
When a VoIP gateway is installed and configured for IP Fax (SIP), you can have fax
communication with G3 fax machines connected to the public telephone network.
For the configuration of a VoIP gateway, check with your network administrator.
The Starting Rate supported in IP Fax (SIP) is G3.
Direct Fax
You can use the Direct Fax feature to fax documents created with your computer
applications directly in the same manner as printing.
For the Direct Fax feature, refer to "Sending Fax" (P.394).
Forwarding feature registered in job flow sheet
By registering a job flow, you can forward documents stored in folder or scanned
documents via IP Fax (SIP).
Registering in the Job Memory
By storing a setting you frequently use in IP Fax (SIP), you can call the setting with a
single button operation.
About IP Fax (SIP)
4
175