2 Product Overview
Finisher-C1 (optional) and Finisher-C1 with Booklet Maker (optional)
9
2
No.
Component
1
Output tray
2
Finisher tray
3
Hole-punch waste container Collects scraps from the puncher.
4
Staple cartridge
5
Booklet tray (Finisher-C1
with Booklet Maker only)
6
Front door
7
Booklet staple cartridge
8
Booklet unit (Finisher-C1
with Booklet Maker only)
9
Center tray (Top cover of
the finisher transport)
Note
50
Outputs are delivered here.
Stapled outputs are delivered here.
Contains staples. Remove this cartridge when replacing or adding
staples, or clearing staple jams.
Documents are delivered here when folding is selected for the Booklet
Creation feature.
Open this cover when clearing paper jams, replacing or adding staples,
clearing staple jams, or discarding punch scraps.
Contains staples. Remove this cartridge when replacing or adding
staples, or clearing staple jams.
Folds and staples outputs.
Copies and prints are delivered here when they cannot be delivered to
the output tray or the finisher tray.
Pull the cover upward when clearing paper jams.
Note
• Remove outputs delivered to the center tray constantly.
• The Finisher-C1 and the Finisher-C1 with Booklet Maker are optional. In this guide, the
Finisher-A1, Finisher-B1, and Finisher-C1 are referred to as the "finisher".
1
2
3
4
5
6
7
8
Function