Control Panel - Fuji Xerox ApeosPort-IV 5070 User Manual

Control Panel

The following describes the names and functions of the components on the control panel.
25
No. Component
1 <Services Home> button
2 Touch screen
3 <Log In/Out> button
4 <Job Status> button
5 <Machine Status> button
6 <Energy Saver> button
1 2
1 2 3
4 5 6
7 8 9
10 11 12
13 14 15
16 17 18
19 20 21
22 23 24
23 22 21 20 19 18
24
Press this button to display the [Services Home] screen.
You can change the services displayed on the [Services Home] screen. For
more information, refer to "1 Before Using the Machine" > "Customizing the
Control Panel" > "Customizing the Button Layout" > "Services Home" in the
Administrator Guide.
Displays messages required for operation, and buttons for various
features. You can directly touch the touch screen to instruct operations
and set features.
Lights up when a user is authenticated in System Administration mode,
Authentication mode, or Accounting mode. Displays the User ID entry
screen for entering System Administration mode, Authentication mode,
or Accounting mode. Also press this button to exit these modes.
Press this button to check or cancel the current job, to check or print
stored jobs, or to check completed jobs.
Press this button to check the machine status and meters, to check the
status of consumables, and to print reports.
Note • By pressing the <Machine Status> button when you exchange
consumables, you can make the output device exit Energy Saver
mode and check the latest status of the consumables.
When the machine is not used for a while, it enters Energy Saver mode
to reduce power consumption. When Energy Saver mode is active, the
<Energy Saver> button lights up.
Press this button to enter or exit Energy Saver mode.
3 4 5 6
1 2 3
4
5 6
7 8 9
0 #
C
17 16 15 14 13 12 11
1 2 3
4
5 6
7 8 9
0 #
C
Function

Control Panel

7
8
9
10
2
59