Watermark (Printing Control Numbers On The Background Of Copies) - Fuji Xerox ApeosPort-IV 5070 User Manual

3 Copy

Watermark (Printing Control Numbers on the Background of Copies)

This feature allows you to faintly print a sequential control number in the background
of each copy page.
If you set "1" as the starting number, "1" is printed on each page of the first copy set
and "2" is printed on each page of the second set.
To prevent, for instance, the duplication of confidential documents that are to be
distributed at a conference, you can use this feature to add sequential numbers to the
copies, and associate the numbers with the conference members.
Important • When you select this feature, if the number of pages scanned by the machine exceeds the
Note
3
1
Select [Watermark].
2
Select any option.
Control Number
Do Not Add
No control number is printed.
Add
A control number is printed. Enter the starting number of the control number. You can
specify a value in the range from 1 to 9999, using [+] and [-] or the numeric keypad.
Stored Watermarks
Displays the [Stored Watermarks] screen.
Refer to "[Stored Watermarks] Screen" (P.127).
Date & Time
Allows you to select whether to print the date and time when the copy job started.
For information on the date format, refer to "5 Tools" > "Common Service Settings" > "Watermark" >
"Date Format" in the Administrator Guide.
126
maximum, the machine will not print the already-scanned data. In that case, follow the
instructions of the message displayed on the screen to cancel the job. The maximum
number of pages that the machine can scan is 999 pages per job.
• If a layout template is specified in [Apply Layout Template to Copy/Print Jobs] under [Force
Annotation] in System Administration mode, the watermark specified here is overlapped with
the text on the layout template when printed. For information on [Force Annotation], refer to
"5 Tools" > "Common Service Settings" > "Force Annotation" in the Administrator Guide.
• When [Force Watermark - Copy] is set to [On], [Watermark] is fixed to [On] and cannot be
changed. For more information on Watermark, refer to "5 Tools" > "Common Service
Settings" > "Watermark" in the Administrator Guide.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.