Color Scanning (Selecting An Output Color); Sided Scanning (Scanning Both Sides Of A Document) - Fuji Xerox ApeosPort-IV 5070 User Manual

Color Scanning (Selecting an Output Color)

You can set the output color for scanning a document.
1
From the menu displayed by selecting [Color
Scanning], select any option.
Auto Detect
The color of the document is determined automatically; the machine scans in full color
when the document is colored, otherwise scans the document in monochrome.
Note • When you select [Auto Detect], the available features on the [Advanced Settings] screen are
Color
Scans a document in full color.
Black & White
Scans a document in monochrome two tones. You can select the document type in
[Original Type].
Note • When you select [Black & White] , [MRC High Compression] on the [File Format] screen will
Grayscale
Scans a document in grayscale. Adds shades to monochrome, creating intermediate
tones that change gradually. Suited to documents containing gradations that cannot be
reproduced with monochrome (2-color tone) scanning.

2 Sided Scanning (Scanning Both Sides of a Document)

You can scan a 1-sided or 2-sided document on one or both sides of paper.
By setting the binding style, both sides are scanned in the same orientation.
1
From the menu displayed by selecting
[2 Sided Scanning], select any option.
1 Sided
Select this option to scan only one side of the document.
2 Sided (Head to Head)
Select this option when both sides of the 2-sided document are in the same orientation.
the same as when you select [Color] in [Color Scanning] for color documents, or the same
as when you select [Black & White] in [Color Scanning] for monochrome documents.
be set to [Off].
E-mail
5
265