Fuji Xerox ApeosPort-IV 5070 User Manual page 138

3 Copy
Finisher-C1/Finisher-C1 with Booklet Maker
A4
8 x 10" ,
8.5 x 11" ,
16K
A4, 8 x 10",
8.5 x 11",
8.5 x 13",
8.5 x 14"
A4, B4,
11 x 17", 8K
3
* : The staple orientation displayed on the touch screen differs from the actual staple orientation. Outputs are stapled
in the orientation shown in the above table.
Paper Size and Hole-Punching Position
(Finisher-B1, Finisher-C1, Finisher-C1 with Booklet Maker)
2 holes*
A4 , B5 , 7.25 x 10.5"
8.5 x 11" , 16K
A4, A3, B4, 215 x 315 mm, 8 x 10"
8.5 x 13", 8.5 x 14", 11 x 15", 11 x 17", 8K
*1 : The distance between the two holes is 70 mm with the US 2/3 Hole Punch Kit, and is 80 mm with the 2/4 Hole Punch
Kit, which is ordinary used.
*2 : Only available for Finisher-C1 and Finisher-C1 with Booklet Maker.
138
1 Staple
,
B5 ,
*
1
,
8 x 10"
,
1 Top
2 Staples
Right
*
2 Holes
,
*2
, 8.5 x 11",
2 Top 2 Right
2 Holes 2 Holes
Top Right