Transparency Options (Inserting Blank Sheets Between Transparencies) - Fuji Xerox ApeosPort-IV 5070 User Manual

Transparency Options (Inserting Blank Sheets between Transparencies)

This feature allows you to insert blank separators between output transparency sheets.
At the same time, you can make copies for handouts.
Important • Using transparency sheets for color (with a white border) may cause a malfunction or paper
Note • When loading A4 size transparencies on Tray 5 (Bypass), we recommend that you load
• Load transparency sheets in a tray in the same orientation as the paper to be used for
1
Select [Transparency Options].
2
Select any option.
Off
Does not insert separators.
Blank Transparency Separators
Inserts a separator each time a transparency is copied. Only one set of copies can be
made.
Blank Separators & Handouts
Inserts a separator each time a transparency is copied. At the same time, the required
number of copies is made for handouts.
Note • This feature does not appear for some models. An optional component is required. For more
Transparency Set & Handouts
Makes copies on transparencies. At the same time, the required number of copies is
made for handouts.
Note • This feature does not appear for some models. An optional component is required. For more
jam.
them in portrait orientation.
handouts and separators.
information, contact our Customer Support Center.
information, contact our Customer Support Center.
Output Format
3
133