Covers (Attaching Covers To Copies) - Fuji Xerox ApeosPort-IV 5070 User Manual

3 Copy
Fold & Staple
When the Booklet Maker Unit for Finisher-B1 (optional) is installed:
The copies are creased in half and stapled at the center. The number of copies that
can be creased and stapled is 2 to 15.
When the Finisher-C1 with Booklet Maker (optional) is installed:
The copies are folded in half and stapled at the center. The number of copies that
can be folded and stapled is 2 to 15.

Covers (Attaching Covers to Copies)

This feature allows you to attach covers to copies.
You can use different types of paper (such as colored paper and heavyweight paper)
as the front and back covers of copies.
Important • When you select this feature, if the number of pages scanned by the machine exceeds the
3
Note
1
Select [Covers].
2
Select any option.
Front Cover
Attaches a front cover to the copies.
Off
No front cover is attached.
Blank Cover
Blank sheets of paper are attached as front covers.
Print on Side 1
The first page of the document is copied on the front side of the front cover.
Print on Side 2
The first page of the document is copied on the back side of the front cover.
114
maximum, the machine will not print the already-scanned data. In that case, follow the
instructions of the message displayed on the screen to cancel the job. The maximum
number of pages that the machine can scan is 999 pages per job.
• If [Covers] is set concurrently with [Booklet Creation], only plain paper can be used for the
covers.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.