Sided Copying (Making 2 Sided Copies); Original Type (Selecting The Document Type) - Fuji Xerox ApeosPort-IV 5070 User Manual

Paper Size
Select from [Auto Detect], [Standard Size], and [Custom Size].
When you select [Auto Detect], the paper size is identified automatically.
When you select [Standard Size] or [Custom Size], refer to "When [Standard Size] is Selected" (P.91) or
"When [Custom Size] is Selected" (P.91), respectively.
Paper Type
Select a paper type.
When [Standard Size] is Selected
Select [Standard Size], and from the lists displayed, select a paper size and then a
paper type.
1
Select a paper size and a paper type.
Note • Select [
When [Custom Size] is Selected
Enter the width and length of paper on the fields displayed after selecting [Custom
Size].
Specify the X (width) in the range from 98 to 432 mm, and the Y (length) in the range
from 89 to 297 mm in 1 mm increments.
Important • When copying on both sides of non-standard size paper, specify the size in the range from
1
Enter a paper size using [+] and [-] or the
numeric keypad.
2
Select a paper type.
Note • Select [

2 Sided Copying (Making 2 Sided Copies)

This feature is the same as [2 Sided Copying] on the [Layout Adjustment] screen. For more information,
refer to "2 Sided Copying (Making 2 Sided Copies)" (P.96).

Original Type (Selecting the Document Type)

This feature is the same as [Original Type] on the [Image Quality] screen. For more information, refer to
"Original Type (Selecting the Document Type)" (P.93).
] to return to the previous
screen or [ ] to move to the next screen.
182 to 432 mm for the X (width) direction and from 128 to 297 mm for the Y (length)
direction.
] to return to the previous screen or [ ] to move to the next screen.
Copy
3
91