Fuji Xerox ApeosPort-IV 5070 User Manual page 373

When [Save as Private Charge Print Job] or [Save as Charge Print Job] is selected in [Receive Control]
under [Charge/Private Print Settings], jobs will not be saved in [Secure Print] under [Secure Print Jobs
& More] even if you select [Secure Print] on the print driver. For more information, refer to "5 Tools" >
"Authentication/Security Settings" > "Authentication" > "Charge/Private Print Settings" in the
Administrator Guide.
For information on how to operate a Secure Print job, refer to the print driver's help.
1
Select [Secure Print].
2
Select the user to check, and select
[Job List].
Note • Select [Refresh] to display the updated
information.
• Select [ ] to return to the previous
screen or [
• You can enter a user ID in [Go to] using
the numeric keypad to display the user ID
at the top of the list.
3
Enter the passcode, and select [Confirm].
Note • If a passcode is not set, the passcode
entry screen does not appear.
4
Select the job to be printed or deleted.
Note • You can select up to 100 files
simultaneously to print or delete the files.
If you select multiple files, they are printed
in the selected order.
5
Select any option.
6
When printing, specify the number of print sets using the numeric keypad.
Select All
Selects all jobs. To deselect all the jobs, select this button again.
Delete
Deletes the Secure Print job.
Note • If jobs with the same Billing ID are all deleted, the Billing ID will be deleted.
Refer to "When [Delete] is Selected" (P.374).
Print Quantity
Specify the number of print sets.
Print
Prints the Secure Print job. After printing, the job is deleted.
Refer to "When [Print] is Selected" (P.374).
] to move to the next screen.
Printing and Deleting Stored Jobs
11
373