Stored Programming Overview - Fuji Xerox ApeosPort-IV 5070 User Manual

8 Stored Programming

Stored Programming Overview

The Stored Programming service allows you to store settings that you will most likely
use frequently and allows you to call them with a single button operation. You can also
assign a screen to a stored program button, to use the button as a short-cut to the
screen.
A stored program can store not only settings of a feature, but a flow of settings
configured on multiple screens.
For example, this service is available when you want to record a procedure starting
from pressing the <Machine Status> button, to displaying the screen under [Print
Reports] to print a Job History Report.
In addition, while Build Job is running, this service can be used for the remaining
document stacks.
For information on Build Job, refer to "Build Job (Processing Documents Scanned with Different
Settings as One Job)" (P.141).
The following shows the reference section for each feature.
Registering/Deleting/Renaming Stored Programs ....................................................................345
Calling a Stored Program..........................................................................................................351
8
344