This Device (Storing Data Scanned By The Machine On A Network Computer) - Fuji Xerox ApeosPort-IV 5070 User Manual

5 Scan
6
The [Store to WSD - Remove Your Originals]
screen appears on the touch screen after a
scan job has been completed. Remove the
originals from the document glass or the
document feeder, and then click [OK].
Note

This Device (Storing Data Scanned by the Machine on a Network Computer)

You can forward the data scanned with the command from the machine to a specified
computer on the network.
1
Load the document on the document glass
5
or in the document feeder, and select [This
Device].
2
Computer names and 5 processing methods
are displayed in the [List of Computers].
Select destination from the list in accordance
with the intended use.
List of Computers
Lists destination and URL.
Note
3
Press the <Start> button.
298
• If the standby screen is not displayed, a scan job will not be started even when the network
computer recognizes the machine.
• Select the [Delete] button to abort an operation. After an operation is aborted, the [Store to
WSD - Remove Your Originals] screen is displayed on the touch screen.
• The machine will not enter the Energy Saver mode while the standby screen is displayed.
For information on Energy Saver mode, refer to "Energy Saver Mode" (P.57).
• Select from among 5 kinds of processing methods (Scan to PC, Scan for Print to PC, Scan
for E-mail to PC, Scan for Fax to PC, Scan for OCR to PC) in accordance with the intended
use.
1 2 3
4
5 6
7 8 9
0 #
C
<Start> button