Fuji Xerox ApeosPort-IV 5070 User Manual page 275

[File Format - DocuWorks Security] Screen
This screen allows you to encrypt a DocuWorks file with a password, and assign the
access privileges for file operation.
1
Select any option.
Off
The file is not encrypted, and no access privilege is assigned.
Password (V4 Compatible)
Encrypts the file by the 56 bit DES method using a password. Files encrypted by this
method can be opened with DocuWorks Ver. 4.0 or later.
Select [Open Password] to set a password.
Password (V4 Incompatible)
Encrypts the file by the 128 bit AES method using a password. Files encrypted by this
method can be opened with DocuWorks Ver. 5.0 or later.
Select [Open Password] to set a password.
Digital Certificate (V4 Incompatible)
Encrypts the file by the 128 bit AES method using a certificate. Files encrypted by this
method can be opened with DocuWorks Ver. 5.0 or later.
Select [Certificate] to set a certificate.
Important • If you encrypt a file using a certificate without Basic Constraints, you cannot use DocuWorks
Note • This feature is supported only by the ApeosPort series.
• When you select [Full Access Password] or [Open Password] in [Digital Certificate (V4
Encryption Algorithm
Displays the encryption methods.
Restricted Operations
Select file operations to assign access privileges. When assigning access privileges,
set [Full Access Password].
Ver. 5.0.1 and Ver. 6.0.1 to open the file. To use such certificates, use DocuWorks Ver.
5.0.2, or Ver. 6.0.2 or later.
Incompatible)], the same certificate name may be redundantly displayed in [Security
Settings] of a DocuWorks document to be generated, in the following conditions. However,
this does not affect the operation.
• When you created a job flow on the machine, the same certificate was selected
redundantly.
• The certificate data was obtained from an LDAP server, and the same certificate was
selected redundantly.
E-mail
5
275