F Code Method - Fuji Xerox ApeosPort-IV 5070 User Manual

4 Fax
4
Use the keyboard displayed on the touch screen to enter the destination and
password in the following format.
Note

F Code Method

You can perform Relay Broadcast by registering the relay station's F code and
password (if necessary) to the machine.
Note
1
Select the [Fax/Internet Fax Options] tab to
display the [Fax/Internet Fax Options]
screen.
4
2
Select [F Code].
3
Select [On].
4
Select the [F Code] box, and enter the F code with the numeric keypad.
Note
Relay Broadcast
The number of digits of the relay station ID:
1: When the relay station IDs and address numbers are two digits
2: When the relay station IDs and address numbers are three digits
234
• You can specify up to 20 locations for relay recipients.
• When performing Relay Broadcast with the F Code method, you can use a password if you
set a receive password for the relay station.
• When performing Relay Broadcast between Fuji Xerox manufactured machines that can be
used as both an initiating station and a relay station, we recommend that you use the fax
signal method.
• Confirm the F code (sub-address) and password of the target relay station.
• You can enter up to 20 digits for the F Code.
Relay Broadcast Print
Directive
Relay Address Address
Station ID Number Number
Up to 20 digits
Address
Number ....