Screens And Buttons Displayed - Fuji Xerox ApeosPort-IV 5070 User Manual

Screens and Buttons Displayed

You can register or change the services and buttons displayed on the touch screen.
Note • The following screens and buttons may have been changed by the system administrator.
Setting the Initial Screen
You can set the screen displayed after switching the power on or exiting Energy Saver
mode.
Setting the Screen Displayed after Auto Clear
You can select [Last Selection Screen] or [Services Home] for the screen to be
displayed after Auto Clear.
Assigning Services to the Custom Buttons
You can assign services to the Custom buttons on the control panel: <Copy>, <(Not In
Use)>, and <Review>.
By assigning frequently-used services to the Custom buttons, you can switch to the
services without returning to the [Services Home] screen.
Note • By default, [Copy] is assigned to the <Copy> button, and [Review] is assigned to the
Customizing the [Services Home] Screen
You can customize the layout of services and buttons on the [Services Home] screen
that is displayed when you press the <Services Home> button on the control panel.
For information on how to customize the [Services Home] screen, refer to "1 Before Using the Machine" >
"Customizing the Control Panel" > "Customizing the Button Layout" > "Services Home" in the
Administrator Guide.
Use the machine according to the changes that have been made.
<Review> button. No service is assigned to the <(Not In Use)> button.
Control Panel
2
63