Job Flow Procedure; Step 1 Opening The [Job Flow Sheets] Screen; Step 2 Selecting A Job Flow Sheet - Fuji Xerox ApeosPort-IV 5070 User Manual

7 Job Flow Sheets

Job Flow Procedure

Job flow sheets are categorized into two types according to the target. One type targets
scanned documents, and the other type targets files stored in folders. This section
describes the first type of job flow sheets, which target scanned documents.
For information on job flow sheets that target files stored in folders, refer to "Configuring/Starting Job
Flow" (P.331).
The following describes the procedure to operate a job flow. Refer to the following
section for each procedure.
To create and register a job flow sheet, use a computer.

Step 1 Opening the [Job Flow Sheets] Screen ..........................................................................338

Step 2 Selecting a Job Flow Sheet ............................................................................................338

Step 3 Confirming/Changing the Job Flow Sheet.....................................................................339
Step 4 Starting the Job Flow Sheet ...........................................................................................339
Note
Step 1 Opening the [Job Flow Sheets] Screen
The following describes how to open the [Job Flow Sheets] screen.
1
Press the <Services Home> button.
7
2
Select [Job Flow Sheets].
Step 2 Selecting a Job Flow Sheet
1
Select a job flow sheet.
For more information on the [Job Flow Sheets] screen,
refer to "Selecting/Changing a Job Flow Sheet" (P.340).
338
• To create a job flow sheet, use EasyOperator or the Device Setup Tool. EasyOperator is
included in the Driver CD Kit. The Device Setup Tool is included in the ApeosWare
Management Suite, which you can download from our website.
<Services Home> button