Setting The Printing Options; Media Print - Text - Fuji Xerox ApeosPort-IV 5070 User Manual

Setting the Printing Options

You can set the printing options on the [Media Print - Text] and [Advanced Settings]
tabs.
By default, pressing the <Review> button on the control panel allows you to view a list
of the setting values.

Media Print - Text

Tab
-
Media Print Text
Advanced Settings
Note • When you select a paper size smaller than the document size, the document image is
• Features displayed on the [Media Print - Text] and [Advanced Settings] screens may vary
Item
Quantity
Paper Supply
2 Sided Printing
Output
Pages per Side
Bitmap Smoothing
automatically reduced. When you select a paper size larger than the document size, the
document is printed at its original size.
depending on the combination of the options installed on the machine.

Setting the Printing Options

Setting Value
Specify the number of print sets in the range from
1 - 999, using the numeric keypad.
Trays 1 - 6
Note • Select [Auto Select] or a tray in which any of
the following sizes of paper is loaded: A3, B4,
A4, A4 , B5, B5 , A5, 8.5 x 11", 8.5 x 11" ,
8.5 x 14", 11 x 17"
• When you select [Auto Select], the machine
automatically selects a tray that contains the
same size of paper as the document, and
prints the document at its original size.
• When the desired tray is not displayed, select
[More], and on the screen displayed, select the
tray.
If you select [More] and then [Bypass], you can
set [Paper Size] and [Paper Type].
Paper Size
A3, B4, A4, A4 , B5, B5 , A5, A5
Paper Type
Select the paper type to be used from the list.
Off, Long Edge Flip, Short Edge Flip
Specify the stapling/hole-punching positions.
When the desired stapling/hole-punching
positions are not displayed, select [More].
Important • If you select and print multiple documents,
all of the documents are stapled together.
To staple only one document, print only
that document.
Off, 2 Pages, 4 Pages
Off, On
10
365