Fuji Xerox ApeosPort-IV 5070 User Manual page 62

2 Product Overview
No. Component
23 One touch buttons
(Only available for
machines with the Fax
service)
2
24 Embedded IC Card Reader
(optional)
25 Paper clip tray
62
Allows you to specify a recipient by simply pressing one button. You can
use the buttons for fax and Internet fax jobs.
Turn over the panels to display buttons 1 - 70, M01, and M02.
There are two ways in which address numbers and stored programs are
assigned to the one touch buttons. Select either of the following:
[Type 1]
Buttons 1 to 70 are used for address numbers and they correspond to
the registered address numbers 0001 to 0070, while buttons M01 and
M02 are used for stored programs and they correspond to the
registered stored programs 1 and 2.
[Type 2]
Buttons 1 to 60 are used for address numbers and they correspond to
the registered address numbers 0001 to 0060, while buttons 61 to 70,
M01, and M02 are used for stored programs and they correspond to
the registered stored programs 1 to 12.
Note • By default, [Type 1] is selected.
• This feature is not available for some models. An optional
component is required. For more information, contact our
Customer Support Center.
For information on how to change the settings registered to the one touch
buttons, refer to "5 Tools" > "Common Service Settings" > "Screen/Button
Settings" in the Administrator Guide.
Used to authenticate a user using a smart card.
When you touch the smart card to the IC Card Reader, the machine
reads the user information registered on the smart card and
authenticates the user.
An optional component is required to use this feature. For more
information, contact our Customer Support Center.
When the machine is in Energy Saver mode, touching the smart card to
the IC Card Reader deactivates Energy Saver mode. However, this
operation does not deactivate Sleep mode. For more information, refer
to "Exiting Energy Saver Mode" (P.58).
Used for placing paper clips and staples.
Function