Fuji Xerox ApeosPort-IV 5070 User Manual page 196

4 Fax
[2 Sided Scanning] Screen
1
Select whether the document is one-sided or
two-sided. When [2 Sided] or [2 Sided (First
Page 1 Sided)] is selected, also select the
orientation of the document.
1 Sided
Select this option to scan one side of the document.
2 Sided
Select this option to scan both sides of the document.
2 Sided (First Page 1 Sided)
Select this option to scan the front side of the first page and both sides of the remaining
pages. Use this option when the back side of the first page is blank.
4
2 Sided (Skip Blank Pages)
Select this option to scan only the document pages that are not blank. You do not need
to take into account which side is the front when sending documents.
Important • If you select [2 Sided (Skip Blank Pages)] in [2 Sided Scanning] when the Skip Blank Pages
Note
Originals
Select [Head to Head] when both sides of the documents are in the same orientation.
Select [Head to Toe] when the front and back sides of the documents are in opposite
orientations.
196
feature is enabled, image loss may occur on the fax document depending on the recipient's
machine. For example, when you select [2 Sided (Skip Blank Pages)] to send an A4 fax
document, image loss may occur in the area where the edge erase amounts is set when the
fax is printed on an A4 document by the recipient's machine.
• When [2 Sided (Skip Blank Pages)] is selected, the settings change as follows:
[Original Type]: [Text]
[Lighten/Darken]: [Normal]
[Reduce/Enlarge]: [100%]
• You can also switch whether to enable [2 Sided (Skip Blank Pages)] by pressing the
<Energy Saver> button while setting the fax features.
• The level of accuracy in which the machine determines whether a page is blank or not differs
depending on the document. For example, if a blank page has background shadows, the
machine may not determine the page as a blank page.
• [2 Sided (Skip Blank Pages)] is displayed only when [Skip Blank Pages] is enabled. For
more information, refer to "5 Tools" > "Fax Service Settings" > "Fax Control" > "Skip Blank
Pages" in the Administrator Guide.