Machine Components - Fuji Xerox ApeosPort-IV 5070 User Manual

2 Product Overview

Machine Components

The following describes machine components and their functions.
4 Tray Model
14
2
13
12
11
10
No. Component
1 Document cover
2 Document glass
3 Control panel
4 Exit 2 tray (optional)
5 Center tray
6 Power switch
7 Front cover
8 Tray 1, 2, 3 (optional),
4 (optional)
9 Locking casters
10 Tray 5 (Bypass)
11 Duplex module
12 Side tray (optional)
40
Holds a document in place.
Load a document here.
Consists of operation buttons, LED indicators, and a touch screen.
Refer to "Control Panel" (P.59).
Outputs are delivered here by separating the center tray into two levels.
Copies and prints are delivered here, facing down.
Switches the power of the machine on and off.
Refer to "Power Source" (P.51).
Open this cover to replace the consumables.
Load paper here.
Used for locking the wheels of the machine. Lock these casters after moving
the machine to its installation site.
Used for loading non-standard paper (thick-stock paper, and other special
media) that cannot be loaded in the Trays 1 to 4, and 6.
Automatically prints or copies on both sides of paper.
Copies and prints are delivered here, facing up.
1
2
3
4
5
6
7
8
9
Function