Sided Scanning (Transmitting 2-Sided Originals) - Fuji Xerox ApeosPort-IV 5070 User Manual

Photo & Text
Select this option when transmitting a document that contains both text and photos.
The machine automatically distinguishes the areas with text and those with photos, and
sets the appropriate image quality for each area of the document.
Photo
Select this option when transmitting a document that contains only photos.
Note • If reduced in size, the scan documents may have stripes in the areas with photos.

2 Sided Scanning (Transmitting 2-sided Originals)

You can scan a 1-sided or 2-sided document on one or both sides of paper for fax
transmission.
Note • The image on the back side of a 2-sided document is rotated so that it is placed in the same
1
Select [2 Sided Scanning].
1 Sided
Select this option to scan one side of the document.
2 Sided
Select this option to scan both sides of the document.
2 Sided (Skip Blank Pages)
Select this option to scan only the document pages that are not blank. You do not need
to take into account which side is the front when sending documents.
Important • If you select [2 Sided (Skip Blank Pages)] in [2 Sided Scanning] when the Skip Blank Pages
• When you select [2 Sided (Skip Blank Pages)] on the [Simple Fax] screen, the machine is
Note • When [2 Sided (Skip Blank Pages)] is selected, the setting of [Original Type] changes to
• You can also switch whether to enable [2 Sided (Skip Blank Pages)] by pressing the
• The level of accuracy in which the machine determines whether a page is blank or not differs
• [2 Sided (Skip Blank Pages)] is displayed only when [Skip Blank Pages] is enabled. For
orientation as the image on the front side.
feature is enabled, image loss may occur on the fax document depending on the recipient's
machine. For example, when you select [2 Sided (Skip Blank Pages)] to send an A4 fax
document, image loss may occur in the area where the edge erase amounts is set when the
fax is printed on an A4 document by the recipient's machine.
set to select [100%] in [Reduce/Enlarge] automatically. When you select an option other
than [2 Sided (Skip Blank Pages)], the machine is set to select [Auto %] in [Reduce/Enlarge]
automatically.
[Text].
<Energy Saver> button while setting the fax features.
depending on the document. For example, if a blank page has background shadows, the
machine may not determine the page as a blank page.
more information, refer to "5 Tools" > "Fax Service Settings" > "Fax Control" > "Skip Blank
Pages" in the Administrator Guide.
Simple Fax
4
185