Folding (Outputting Bi-Folded) - Fuji Xerox ApeosPort-IV 5070 User Manual

Folding (Outputting Bi-Folded)

This feature allows you to fold copies in half, or crease copies in half.
Important • When Finisher-B1 or Finisher-C1 is installed, do not remove output copies from the finisher
Note • The supported paper orientation is only
• This feature does not appear for some models. An optional component is required. For more
1
Select [Folding].
2
Select any option.
Off
Does not fold copies.
Single Fold
This option is displayed when the Booklet Maker Unit for Finisher-B1 (optional) or the
Finisher-C1 with Booklet Maker (optional) is installed.
When the Booklet Maker Unit for Finisher-B1 (optional) is installed:
Creases copies in half.
When the Finisher-C1 with Booklet Maker (optional) is installed:
Folds copies in half.
tray until all of the output copies have been delivered.
information, contact our Customer Support Center.
. Select the tray whose orientation is set to
Output Format
.
3
131