Fuji Xerox ApeosPort-IV 5070 User Manual page 310

5 Scan
Original Orientation
Specify the orientation of the loaded document.
When you load the top edge of the document against the left side of the document glass
or the document feeder, and then select [Sideways Images], the document is displayed
in the correct orientation when viewed on your computer screen.
Note
Upright Images
Select this option when placing the top edge of the document against the top side of
the document glass or document feeder.
Sideways Images
Select this option when placing the top edge of the document against the left side of
the document glass or document feeder.
Reduce/Enlarge (Specifying a Scanning Ratio)
This feature allows you to set the scanning ratio for the document to be scanned.
Note
1
Select [Reduce/Enlarge].
5
2
Select any option.
Proportional %
Allows you to select a preset ratio, or enter a value in the range from 25 to 400% in 1%
increments.
Use the numeric keypad or [+] and [-] to enter a value.
Variable %
Enter the scanning ratio. Specifying "100%" scans at the same image size as the
original document.
Preset %
Select from preset ratios.
You can change the default values of scan ratios other than [100%]. For information on the settings,
refer to "5 Tools" > "Scan Service Settings" > "Reduce/Enlarge Presets" in the Administrator Guide.
310
• If the [Original Orientation] setting differs from the actual document orientation, the machine
may not detect the top of the document correctly.
• When [Searchable Text] is set to [Searchable], [Reduce/Enlarge] is set to [100%].