Job Assembly; Build Job (Processing Documents Scanned With Different Settings As One Job); Select [Copy] On The [Services Home] Screen - Fuji Xerox ApeosPort-IV 5070 User Manual

Job Assembly

This section describes the features you can select on the [Job Assembly] screen. The
following shows the reference section for each feature.

Build Job (Processing Documents Scanned with Different Settings as One Job) ................... 141

Sample Job (Checking the Finished Output of the Copy)........................................................ 145
Combine Original Sets (Adding Originals).............................................................................. 147
Form Overlay (Making Copies to Overlay Documents).......................................................... 148
Delete Outside/Delete Inside (Deleting Outside or Inside of the Selected Area) .................... 149
Stored Programming (Calling a Stored Program for Build Job).............................................. 151
1
Select [Copy] on the [Services Home]
screen.
2
Select a feature on the [Job Assembly]
screen.
Build Job (Processing Documents Scanned with Different Settings as One Job)
This feature allows you to apply different copy settings to each document page or each
document stack, and then output the copies as one job.
Note • This feature does not appear for some models. An optional component is required. For more
1
Select [Build Job].
2
Select [On].
information, contact our Customer Support Center.

Job Assembly

3
141