Color Scanning (Selecting An Output Color); Sided Scanning (Scanning Both Sides Of A Document) - Fuji Xerox apeosport-v c7785 User Manual

5 Scan
2
The message screen on the right will be
displayed. Configure each settings and press
the <Start> button.
3
Preview the scanned images after the document is scanned.
For more information, refer to "Previewing the Scanned Images during a Scan Job" (P.295).

Color Scanning (Selecting an Output Color)

You can set the output color to scan a document.
Note
1
From the menu displayed by selecting [Color
Scanning], select any option.
5
 Auto Detect
The color of the document is determined automatically; the machine scans in full color when
the document is colored, otherwise scans in monochrome.
Note
 Color
Select this option to scan a color document.
 Black & White
Scans a document in monochrome two tones. You can select the document type in [Original
Type].
Note
 Grayscale
Scans a document in grayscale. Adds shades to monochrome, creating intermediate tones
that change gradually. Suited to documents containing gradations that cannot be
reproduced with monochrome (2-color tone).

2 Sided Scanning (Scanning Both Sides of a Document)

You can scan a 1-sided or 2-sided document on one or both sides of paper.
By setting the binding style, both sides are scanned in the same orientation.
316
• [Color Scanning] is not displayed on the [E-mail] screen depending on the settings in the System
Administration mode. In that case, set [Color Scanning] from the [Advanced Setting] screen.
• When you select [Auto Detect], the available features on the [Advanced Settings] screen are the
same as when you select [Color] in [Color Scanning] for color documents, or the same as when you
select [Black & White] in [Color Scanning] for monochrome documents.
• [Black & White] is not selectable when [MRC High Compression] is set to [On] on the [File Format]
®
screen or Microsoft Office format is selected.