Upper Pinch Guide Assembly Removal - Lexmark W850n Manual

Upper pinch guide assembly removal

1.
Open the finisher front door assembly.
2.
Remove the rear upper cover. See
3.
Remove the drive motor (buffer/transport). See
transport) removal" on page
4.
Remove the three screws securing the hinge of the upper pinch guide assembly (A) on the rear of the
finisher.
5.
Move the upper pinch guide assembly hinge from the rear of the finisher.
6.
Remove the upper pinch guide assembly (A) from inside of the finisher in the direction of the arrow.
A
"Rear upper cover removal" on page
4-115.
Rear
"Drive motor (buffer/transport) and belt (buffer/
Front
4024-110
4-24.
A
4-109
Repair information