Connect a Smart Card Reader/Writer or PINpad 501
Step 5: Connect Optional Device(s)
To connect a SC 4xx or SC 5xx smart card reader/writer, or a PINpad
501, to the Omni 3200 terminal (see Figure 12):
1. If a cable is not already connected to the smart card reader/writer
or PINpad 501, insert the small modular plug on one end of the
interface cable into the modular jack on the optional device.
2. Insert the larger RJ45-type plug on the other end of the interface
cable into the 'Bar Code/PINpad' serial port on the back panel of
the terminal.
Figure 12 SC 4xx, SC 5xx, and PINpad 501 Connection
Setting Up the Terminal
13