Omni 3200 Reference Manual
Step 1: Select a Location for the Terminal
2
Select a location for the terminal that is convenient for the task or
tasks you must perform, and which offers adequate ventilation and
protection.
Caution: The Omni 3200 terminal is designed for indoor use only.
Place the Omni 3200 on a flat surface such as a table or countertop.
Avoid areas with:
•
Excessive heat or dust
•
Oil or moisture
•
Devices that cause excessive voltage fluctuations or electrical
noise, such as air conditioners, fans, electric motors, neon signs,
or high-frequency security devices
•
Direct sunlight or objects that radiate heat
The terminal should also be conveniently located in relation to
telephone line and power connections.
The two power pack cables are each about 1.8 meters (6 feet) long
and the telephone line cord is about 2.1 meters (7 feet) long. The
telephone line connection for the Omni 3200 requires a telephone
base unit or a modular telephone company wall jack.
Warning: Do not use this product near water, including a bathtub,
wash bowl, kitchen sink, or laundry tub. Do not use in a wet basement
or near a swimming pool. Avoid using a telephone (other than a
cordless type) during an electrical storm.
Step 1: Select a Location for the Terminal