VeriFone Omni 3200 Reference Manual page 166

Omni 3200 Reference Manual
A-10
--STACK TOO BIG
This error message is displayed when the application program
requires a larger stack size than the terminal memory has space for.
Download the application program again. If the error message
persists, contact your local VeriFone representative for assistance.
Su
Abbreviation for Sunday. This appears as part of the date and time
prompt when you use the date/time function in System Mode.
SYSTEM DIAG
This message is displayed when you press the [4] key in System
Mode to initiate a series of local tests of system devices such as the
magnetic card reader and the Telco connection. When you activate
local System Diagnostics mode, you can manually perform up to four
system device tests in any order.
SYSTEM DIAG1234567890
In local System Diagnostics mode, entered by pressing the [4] key in
System Mode, you can test the keyboard and display panel by keying
in a series of digits. You would see the above message if you press the
numeric keys 1 through 9 and 0 in sequence.
SYSTEM PASSWORD?
The terminal is requesting that you enter the System Password as a
prerequisite to entering System Mode. Key in the password and then
press [FUNC/ENTER]. The default password for the Omni 3200
terminal, which is pre-set at the factory, is [1] [ALPHA] [ALPHA] [6]
[6] [8] [3] [1]. It is recommended that you change the System
Password immediately after you receive the terminal.
SYSTEM= VPQXXYYZ
This prompt, which is called the System Prompt, indicates that the
terminal is running in System Mode. The alphanumeric code which
appears to the right of the SYSTEM= prefix is the version ID of
terminal's firmware, in VPQXXYYZ format.