VeriFone Omni 3200 Reference Manual page 111

Table 24 Operating System Download by Telephone
Display
4. SYSTEM=
(then)
(Bootloader version ID)
(then)
OPSYS NEEDED
ENTER * / 0 / #
5. OPSYS NEEDED
ENTER * / 0 / #
6. OPSYS NAME
7. OPSYS ID
Operating System Downloads
If you select the [1] option in Step 3, the terminal's
bootloader firmware executes and you see the
SYSTEM= message, followed by the bootloader's
version ID (for example, VPZ06AO0).
After a few seconds, the OPSYS NEEDED prompt is
displayed giving you three procedure options.
To initiate the direct operating system download, press
the [0] key.
NOTE: At this point, any key entry other than those
prompted by the procedure is 'INVALID' until the
download operation is completed. (To stop the
procedure, you can disconnect the power from the
terminal and start over again at Step 1.)
At the OPSYS NEEDED prompt, press [0] to select
the operating system download by telephone option.
This message is displayed if the name of the operating
system to be downloaded has not been entered in the
CONFIG.SYS file. For ZONTALK, the key for this
record is *OS.
Key in the name of the operating system and press
[FUNC/ENTER].
This message is displayed if the ID (serial number) of
the operating system to be downloaded has not been
entered in the CONFIG.SYS file. For ZONTALK, the
key for this record is *OT.
Key in the serial number of the operating system and
press [FUNC/ENTER].
Performing Downloads
Action
95